Incremental Build Instructions

From Hypercube Evolution Wiki
Revision as of 03:15, 12 December 2017 by Jonnydev13 (talk | contribs) (Incremental Build Instructions)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Incremental Build Instructions

This page will have full instructions for a Hypercube Evolution build from start to finish. It is arranged in phases so that you could build the printer gradually over time as needed. Each of the pages below should list all the parts needed for that portion of the build.

  1. Preparation
  2. Frame
  3. Y-Axis
  4. X-Axis (work in progress)