Difference between revisions of "Main Page"

From Hypercube Evolution Wiki
Jump to: navigation, search
(Useful Resources: rm tick)
(table)
Line 4: Line 4:
 
The Hypercube Evolution is a 3D Printer designed by [https://www.thingiverse.com/SCOTT_3D/about Scott3d]. It is styled after the [https://www.thingiverse.com/thing:1752766 Hypercube] printer designed by [https://www.thingiverse.com/Tech2C/about Tech2C]. The HEVO follows the [http://corexy.com/theory.html CoreXY] philosophy with a "standard' build area of 300*300*300. However, it is an extremely modular and expandable design which can be scaled up (to 700*700*700 and beyond).
 
The Hypercube Evolution is a 3D Printer designed by [https://www.thingiverse.com/SCOTT_3D/about Scott3d]. It is styled after the [https://www.thingiverse.com/thing:1752766 Hypercube] printer designed by [https://www.thingiverse.com/Tech2C/about Tech2C]. The HEVO follows the [http://corexy.com/theory.html CoreXY] philosophy with a "standard' build area of 300*300*300. However, it is an extremely modular and expandable design which can be scaled up (to 700*700*700 and beyond).
  
 +
{| class="wikitable" width="100%"
 +
|-
 +
|
 
== Useful Resources ==
 
== Useful Resources ==
 
* [https://www.thingiverse.com/thing:2254103 HEVO on Thingiverse]
 
* [https://www.thingiverse.com/thing:2254103 HEVO on Thingiverse]
Line 11: Line 14:
 
* [https://www.youtube.com/watch?v=1rctCsUGnX8&list=PL0W24Oa1xQaKBwoybBBDC0OhnNENtpoIz Original Instructional Videos - YouTube]
 
* [https://www.youtube.com/watch?v=1rctCsUGnX8&list=PL0W24Oa1xQaKBwoybBBDC0OhnNENtpoIz Original Instructional Videos - YouTube]
  
 +
||
 
== Where to Begin ==
 
== Where to Begin ==
 
* [[Bill Of Materials]]
 
* [[Bill Of Materials]]
Line 16: Line 20:
 
* [[Controllers]]
 
* [[Controllers]]
 
* [[Frequently Asked Questions]]
 
* [[Frequently Asked Questions]]
 
+
|-
 +
|
 
== Physical Build ==
 
== Physical Build ==
 
* [[Bearing Prep]]
 
* [[Bearing Prep]]
 
* [[Belt Layout]]
 
* [[Belt Layout]]
 +
||
 +
== Completed ==
 +
|}

Revision as of 16:52, 20 July 2017

HEVO by Scott 3D - 2 designs : Single (left) or Dual Z axis (right)

Welcome to the Hypercube Evolution (HEVO) Wiki

The Hypercube Evolution is a 3D Printer designed by Scott3d. It is styled after the Hypercube printer designed by Tech2C. The HEVO follows the CoreXY philosophy with a "standard' build area of 300*300*300. However, it is an extremely modular and expandable design which can be scaled up (to 700*700*700 and beyond).

Useful Resources

Where to Begin

Physical Build

Completed