Main Page

From Hypercube Evolution Wiki
Revision as of 21:29, 31 July 2017 by ShakataGaNai (talk | contribs) (adding country section)
Jump to: navigation, search
HEVO by Scott 3D - 2 designs : Single (left) or Dual Z axis (right)

Welcome to the Hypercube Evolution (HEVO) Wiki

The Hypercube Evolution is a 3D Printer designed by Scott3d. It is styled after the Hypercube printer designed by Tech2C. The HEVO follows the CoreXY philosophy with a "standard' build area of 300*300*300. However, it is an extremely modular and expandable design which can be scaled up (to 700*700*700 and beyond).

Useful Resources

Where to Begin

Physical Build

Country Specific